Basic Playback
1.
Prepare the power supply.
Set the Power Switch to the ON position to turn the player on.
2.
Load a disc.
Press the Open/Close button to open the disc tray. Insert a disc with the label-side up.
Press the Open/Close button again to close the disc tray.
•
If a single-sided disc is inserted upside-down, the player will display "NO DISC" or
"BAD DISC".
3.
Start playback.
Press PLAY to start playback (some discs may start playing automatically).
Play/Pause/Stop
•
Press
to play the disc for the first time.
•
Press
during playback to pause. Press
•
Press
during playback to stop the disc ("Pre-Stop"). Press
time-point at which the disc was stopped.
•
Press
when the disc is "Pre-Stopped" to stop playback completely. (When
the disc will start playing from the beginning.)
Previous/Next (Skip)
•
Press
to skip to the next track (DVD, CD, etc).
•
Press
to return to the previous track (DVD, CD, etc).
Forward/Reverse (Search)
•
Press
to change the rate of forward playback. Each successive press of
the rate of forward playback.
•
Press
to change the rate of reverse playback through the disc. Each successive press of
will change the rate of reverse playback.
Slow
•
Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate
of slow-motion playback. Press
•
Press STEP frame-by-frame playback. Each successive press of STEP will advance the
video one frame. Press
Note:
Audio will be muted during fast-forward, fast-reverse, and slow-motion playback.
14
BASIC OPERATIONS
to resume normal playback.
to resume normal playback.
again to resume playback.
to resume playback at the
Normal
x2
x4
Normal
x1/2
x1/4
is pressed,
x8
x16
x32
will change
x1/8
x1/16
x1/32