Viewing And Managing Images - Olympus Camedia E-20P Basic Manual

Viewing and Managing Images

Playing Back Images
To enter the playback mode so you can view
images, set the mode dial to
mode dial set to P, A, S, or M, rapidly press the
monitor button twice. The image of the
most recent picture taken is displayed in the
monitor. Press or
or next image. Press
frames to the previous image or jump 10 to the
next image.
If you want to enlarge an image, set the mode
dial to playback , and then turn the main dial
to the right toward the magnifying glass mark
(or turn the sub dial clockwise). Every time
you move the dial one position to the right, the
magnification of the image increases. Use the
pointers on the arrow pad to scroll the image
left, right, up, or down. To restore the original
display, rotate the main dial to the left (or rotate
the sub dial counterclockwise).
If you want to display more than one image in
the monitor, use the index display. Set the
mode dial to playback
Displaying Image Information
While viewing an image during playback, you can display the information about the settings when the
picture was taken. Set the mode dial to playback
rapidly press the monitor button
sub dial to the right or left to select one of the three information display formats superimposed on the
displayed image. If the histogram feature is switched on, an additional display will show the
histogram. The histogram display can be switched on in the shooting mode. The sample below shows
the display with all the information (without the histogram).
Memory card
Folder name/
file name
DCF Standard
file number
Date picture
taken
14
, or with the
to display the previous
or to jump 10
, and then turn the
twice). Hold down the
Protected
Time picture
taken
main dial to the left toward the index mark
turn the sub dial counterclockwise). Every time
you move the dial one position to the left, the
number of images displayed in the index
increases (4, 9, 16). To move the green
highlight in the index, press
the previous or next image. Press
display the previous or next index. With the
green highlight on the image you want to
select, rotate either dial to the right to return to
the single-image display.
To leave the playback mode, if the mode dial is
, set the mode dial to P, A, S,
set to playback
or M. If the mode dial is set to P, A, S, or M,
press the monitor button
the monitor.
You can also use the playback mode menu to
set up a slide show that will automatically
display each image for 5 seconds continuously,
starting with the currently displayed image, until
you press the or
(or with the mode dial set to P, A, S, or M,
button and then turn the main dial or
Selected for printing
Resolution, compression
Shutter speed, aperture value
Exposure compensation
White balance setting
ISO (When set AUTO, the ISO value
while shooting appears)
Flash intensity compensation
Frame number (or rate of enlargement if
image enlarged for display)
(or
or to select
or to
once to switch off
button.