Securing Workpiece - Makita LS1013 Instruction Manual

2 1
1. Blade case
2. Arrow
3. Saw blade
4. Arrow
1
2
1. Dust nozzle
2. Dust bag
3. Fastener
14
Return the blade guard and center cover to its original posi-
001534
4 3
tion. Then tighten the hex bolt clockwise to secure the center
cover. Release the handle from the raised position by pulling
the stopper pin. Lower the handle to make sure that the
blade guard moves properly. Make sure shaft lock has
released spindle before making cut.
Dust bag
001536
The use of the dust bag makes cutting operations clean and
dust collection easy. To attach the dust bag, fit it onto the
dust nozzle.
When the dust bag is about half full, remove the dust bag
from the tool and pull the fastener out. Empty the dust bag of
3
its contents, tapping it lightly so as to remove particles adher-
ing to the insides which might hamper further collection.
NOTE:
If you connect a Makita vacuum cleaner to your saw, more
efficient and cleaner operations can be performed.

Securing workpiece

WARNING:
• It is extremely important to always secure the workpiece
properly and tightly with the vise. Failure to do so can
cause the tool to be damaged and/or the workpiece to
be
RESULT. Also, after a cutting operation, DO NOT raise
the blade until the blade has come to a complete stop.
destroyed. PERSONAL INJURY MAY ALSO