Table of Contents
Advertisement
STEP 1
1
When using for the first time, simply point the nozzle in to the sink, then press the Main
Button to switch on the device.
STEP 2
2
Rotate the Main Button on the unit to adjust water pressure/pulse rate. Slide the Pause
Switch on the handle to the 'O' position to pause the water flow.
STEP 3
3
Now stand over the sink and place the tip in your mouth, and then slide the Pause
Switch to the 'I' position. Keep your mouth slightly open to avoid the water splashing.
STEP 4
4
Position the water jet flow at a 90° angle to the teeth and gums.
5
STEP 5
Move the water jet slowly along the teeth. The water flow will briefly pause at 30 second
intervals to remind you to move to the next gum line, i.e. outside, inside, top & bottom.
The unit will continue to operate until the two-minute cycle is complete.
TO SWITCH OFF
Slide the Pause Switch on the handle to the 'O' position to pause the water flow and
then press the ON/OFF button.
HOW TO USE
6
Advertisement
Table of Contents
