Place the device on a flat surface away from sharp
objects and make sure the cord is dry and not
damaged. The device is powered by a special
adaptor with a DC jack connector.
STEP 1
Insert the plug into the DC
jack on the bottom of base
and plug the adaptor cord
into an electrical outlet.
STEP 2
Remove the Nozzle Case.
Inserting the nozzle
Insert the tip into the centre of
the Nozzle Connector until you
feel it click in to place. Gently
try to pull the tip out to ensure
it is firmly locked in place.
GETTING STARTED
INSERTING & REMOVING NOZZLES
5
STEP 3
Fill tank with water no warmer
than
40ºC
and
Nozzle Case.
Removing the nozzle
Press the Release Button on
the handle and pull the nozzle
out.
replace