• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, remove these parts in order, if any:
• "Computer cover" on page 28
• 2.5-inch primary hard disk drive cage. See "Primary storage drives" on page 32
Removal steps
M.2 solid-state drive bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Computer cover" on page 28
• 2.5-inch primary hard disk drive cage. See "Primary storage drives" on page 32
• "M.2 solid-state drive and heat sink" on page 41
42
P348 User Guide