Table of Contents
Advertisement
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 28
• "Optical drive" on page 29
• "Front bezel" on page 31
2. Disconnect the front fan cable from the front fan connector on the system board.
Replacement procedure
Note: The front fan is attached to the chassis by four rubber mounts. Break or cut the rubber mounts and
gently pull the front fan out of the chassis.
Rear fan
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
48
P348 User Guide
Advertisement
Table of Contents
