Table of Contents
Advertisement
1. GETTING STARTED
What's In The Box?
• Verismo™ Fresnel WW Fixture
• Power Cable
• This Lovely User Manual
Getting It Out Of the Box
Congratulations on purchasing the Verismo™ Profile WW. Now that you've got
your fixture, you should carefully unpack the box and check the contents to
ensure that all parts are present and in good condition. If anything looks as if
it has been damaged in transit, notify the shipper immediately and keep the
packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
Warning! All fixtures must be connected to circuits with a suitable
Ground (Earthing).
Getting A Hold Of Us
If something happens to go wrong, visit blizzardpro.com/support and
open a support ticket. We'll be happy to help, honest.
Disclaimer: The information contained in this document are subject to change without
notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions
that may appear in this user manual. We reserve the right to update the existing, or create
a new document to correct any errors or omissions at any time. You can download the
latest version of this document from www.blizzardpro.com.
Author:
J. Thomas
Verismo™ Fresnel WW - Rev. A
Date:
1/24/2022
Page 3
Last Edited:
J. Thomas
Date:
7/13/2022
© 2022 Blizzard Lighting, LLC
Advertisement
Table of Contents
