Stiletto™ Ray-Z; Getting Started; What's In The Box; Getting It Out Of The Box - Blizzard Stiletto Ray-Z Manual

Table of Contents

Advertisement

1. GETTING STARTED

What's In The Box?

• Stiletto™ Ray-Z
• An Ever-So-Handy Power Cord
• 1 x Set of Mounting Brackets
• 1 x DMX Cable
• 1 x Safety Cable
• This Lovely User Manual

Getting It Out Of The Box

Congratulations on purchasing the Stiletto™ Ray-Z professional LED moving head fixture!
Now that you've got your Stiletto™ Ray-Z, you should carefully unpack the box and check
the contents to ensure that all parts are present and in good condition. If anything looks
as if it has been damaged in transit, notify the shipper immediately and keep the packing
material for inspection. Again, please save the carton and all packing materials. If a fixture
must be returned to the factory, it is important that the fixture be returned in the original
factory box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that the
fixture you receive is suitable for your local power supply. See the label on the fixture or
refer to the fixture's specifications chart for more information. A fixture's listed current
rating is its average current draw under normal conditions. Check the fixture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All fixtures must
be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something happens goes wrong, please visit www.blizzardpro.com/support and open a
support ticket. We'll be happy to help, honest.
Disclaimer: The information and specifications contained in this document are subject
to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any
errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the
right to update the existing document or to create a new document to correct any errors
or omissions at any time. You can download the latest version of this document from www.
blizzardpro.com.
Author:
J. Thomas
Stiletto™ Ray-Z Manual Rev. A
Date:
10/8/2019
Page 3
Last Edited:
J. Thomas
Date:
10/8/2019
© 2019 Blizzard Lighting, LLC

Advertisement

Table of Contents
loading

Table of Contents