Static Mode; Dimming Curves; Dimming Speed - Blizzard Verismo Fresnel WW Manual

DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Select the Channel Mode
1.) Navigate the menu to reach DMX, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Control Mode, then <ENTER>.
3.) Then use the <UP/DOWN> buttons to select CH-2, CH-3, CH-4, or CH-
6, and press <ENTER> to confirm.
Select the Starting DMX Address
1.) Navigate the menu to reach DMX, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Address, then <ENTER>.
3.) Then use the <UP/DOWN> buttons to select a value from 1-512, and
press <ENTER> to confirm.

Static Mode

1.) Navigate the menu to reach Static, and press <ENTER>.
2.) Use the <UP/DOWN> buttons highlight Dimmer, Dimmer Fine,
Strobe, or Zoom and press <ENTER>.
3.) The Dimmer values will increase/decrease the brightness from 0% to
100%, Strobe values will change the effect (slow to fast), and Zoom will
adjust the zoom level (wide to narrow).

Dimming Curves

1.) Navigate the menu to reach Personality, and press <ENTER>.
2.) Use <UP/DOWN> to highlight Dim Curve, and press <ENTER>.
3.) Then use the <UP/DOWN> buttons to select Linear, Square Law, Inv
Square Law, or S curve, and press <ENTER>.
Linear
DMX%
Note: Smoother (and slower) dimming capabilities can be achieved with use of the 4
available dimming curve settings.

Dimming Speed

Allows you to set a fade speed of either Low, Medium, or High. This can help
simulate fade speeds of incandescent lamps.
1.) Navigate the menu to reach Personality, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Dim Speed. Press <ENTER>.
3.) Then use the <UP/DOWN> buttons highlight Off, Low, Medium, or
High, then press the <ENTER> button.
Verismo™ Fresnel WW - Rev. A
Square Law Inv Square Law
DMX%
Page 12
S Curve
DMX%
© 2022 Blizzard Lighting, LLC
DMX%