Section 10 -- Connecting To The Machine Control Circuit - Omron MiniSafe 4800 Series Installation And Operating Manual

10 C
ONNECTING
C
IRCUIT
L
! WARNING!
electrical system only. Never connect the MS4800 system to a positive ground (protective earth)
system. With a positive ground (protective earth) wiring scheme, certain simultaneous shorts of
both safety outputs may not be detected and the guarded machine may not stop, resulting is
severe operator injury.
L
WARNING!
!
output fail, the machine may not stop, resulting in severe operator injury. The machine must be
connected using both safety outputs.
OMRON Scientific Technologies Inc.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
T T M
O HE ACHINE
This product is designed for use on a 24 VDC, negative ground (protective earth)
Never use only a single safety output to control the machine. Should this single
31
C
ONTROL
© OMRON STI 0613 PN99804-0060 Rev. B
10