1
power button cable connector
3
palm rest
Replacing the Palm Rest
1. Follow the instructions in
2. Slide the tabs on the palm rest into the slots on the middle cover and gently snap the palm rest into place.
3. Connect the touch pad cable and the power button cable to the connectors on the system board.
4. Replace the keyboard (see
5. Replace the fourteen screws that secure the palm rest to the computer base.
6. Replace the memory module(s) (see
7. Replace the module cover (see
8. Follow the instructions from
9. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
2
touch pad cable connector
4
plastic scribe
Before You
Begin.
Replacing the
Keyboard).
Replacing the Memory
Replacing the Module
step 4
to
step 5
in
Replacing the Optical
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Module(s)).
Cover).
Drive.