Removing The Camera Module - Dell Inspiron N4010 Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ N4010 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Camera Module
1. Follow the instructions in
2. Remove the battery (see
3. Follow the instructions from
4. Remove the module cover (see
5. Remove the memory module(s) (see
6. Remove the keyboard (see
7. Remove the palm rest (see
8. Remove the display assembly (see
9. Remove the display bezel (see
10. Remove the display panel (see
11. Peel the camera module from the display cover.
12. Lift the camera module and turn it over.
13. Remove the tape that secures the camera cable to the connector on the camera module.
1 camera module
3 tape
14. Disconnect the camera cable from the connector on the camera module.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
step 3 to step 4 in Removing the Optical
Removing the Module
Removing the Memory
Removing the Keyboard).
Removing the Palm Rest).
Removing the Display
Removing the Display
Removing the Display
2 display cover
UserManuals.info
Removing the
Drive.
Cover).
Module(s)).
Assembly).
Bezel).
Panel).
Battery) before working inside the