11 Remove the six screws that secure the palm-rest assembly to the display
assembly.
12 Note the routing of camera cable, display cable, and Mini-Card antenna
cables and remove the cables from the routing guides.
13 Lift the palm-rest assembly off the display assembly.
2
1
palm-rest assembly
CAUTION:
Carefully separate the palm-rest assembly from the display assembly
to avoid damage to the display assembly.
Replacing the Palm-Rest Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the palm-rest assembly on the display assembly and route the display
cable, camera cable, and Mini-Card antenna cables through the routing
guides.
78
Palm-Rest Assembly
All manuals and user guides at all-guides.com
2
1
(6)
screws