Removing The Palm Rest - Dell Inspiron N4010 Service Manual

Back to Contents Page
Palm Rest
Dell™ Inspiron™ N4010 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Palm Rest
1. Follow the instructions in
2. Remove the battery (see
3. Follow the instructions from
4. Remove the module cover (see
5. Remove the memory module(s) (see
6. Remove the fourteen screws that secure the palm rest to the computer base.
7. Remove the keyboard (see
CAUTION:
8. Disconnect the touch pad cable and the power button cable from the connectors on the system board.
CAUTION:
9. Slide a plastic scribe between the computer base and the palm rest. Pry and lift the palm rest off the computer base.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
step 3 to step 4 in Removing the Optical
Removing the Module
Removing the Memory
Removing the Keyboard).
Pull on the plastic tab on top of the connectors to avoid damaging the connectors.
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
UserManuals.info
Removing the
Drive.
Cover).
Module(s)).
Battery) before working inside the