Output Loading Mode Setting - PROEL PLLEDCNTRHP User Manual

4.7 Output loading Mode Setting

In the function, user can flip the dip-switch 5 & 6 (6-way Mode Dip Switch)
to select the desired Output Loading Mode.
1.) RGB Output Mode
OFF
" " position, one output with R.G.B. Control is controlled by three
channels separately.
2.) WHITE Output Mode is engaged by flipping the dip-switch 4 to the
ON
" " position and the dip-switch 5 to the "
R.G.B. Control is controlled by one channel and the output of R.G.B. Is
identical.
3.) COOL WHITE & WARM WHITE Output Mode is engaged by flipping the
dip-switch 4 to the "
position, one output with Cool White & Warm White is controlled by two
channels. The output with Cool White is controlled by Ch 1, and the
output of R.B. Is identical; the output with Warm White is controlled by
Channel no. 2, and the output is G.
4.) RGB Output Mode e e e is engaged by flipping the dip-switch 4 and 5 to the
ON
" " position, one output with R.G.B. Control is controlled by three
channels separately.
3.) 3 Group Output Mode is engaged by
flipping the dip-switch 1 to the "
position and the dip-switch 2 to the "
position, has 3 group output and has 2
identical outputs distributed over 3 groups,
Output1~2 is identical, Output 3~4 is
identical and Output 5~6 is identical.
4.) 6 Group Output Mode is engaged by
flipping the dip-switch 1& 2 to the "
position, has 6 group output and Output 1~6
is not perfectly identical.
de is engaged by flipping the dip-switch 4 and 5 to the
de de
OFF
" position and the dip-switch 5 to the "
OFF
" position, one output with
OFF
"
ON
"
ON
"
ON
"
23