4.4 Adjusting chase speed
1. The Stand Alone Mode enables;
2. Thus, flip the dip-switch 4,5 & 6(10-way Function Dip Switch)to adjust a
desired level for chasing speed.
4.5 Selecting Built-in programs
1. The Stand Alone mode enables;
2. Thus, flip the dip-switch 7,8 & 9 (10-way Function Dip Switch) TO select
the desired program
4.6 Output Group Mode Setting
In the function, the dip-switch 1& 2 (6-way Mode Dip Switch)is used to set
your desired Output Group mode
1.) 1 Group Output Mode is engaged by flipping the dip-switch 1& 2 to the
OFF
"
" position, has 1 group output and Output 1~6 is identical.
2.) 2 Group Output Mode is engaged by flipping the dip-switch 1 to the
ON
"
" position and the dip-switch 2 to the "
output and has 3 identical outputs distributed over 2 groups, Output1~3 is
identical, and Output 4~6 is identical.
22
OFF
" position, has 2 group