Main Features; Set Up; Power Supply - PROEL PLLEDCNTRHP User Manual

- Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.
- When unpacking, please check the unit is not damaged. Should
something wrong happen to this product,
- contact the local dealer immediately.
All rights reserved. No part of the manual included with this product may
be reproduced, transmitted,
transcribed or translated into any language in any form, by any means,
without authorized permission.

1. MAIN FEATURES

PLLEDCNTRHP is a HP LED driver unit, specially used to drive 1 Watt high
power LED fixtures, such as PLLEDCLHP.
Also PLLEDCNTRHP is engaged as a combination of a control interface and
tension provider for 1Watt high power LED fixtures.
Providing built-in DC24V 6.5A PSU and DC 48 3.2A.
Ability of the maximum of 6 channels can be controlled separately, and
3x350mA capacity for each output (Total 6 ports).
All work modes and parameters can be set by flipping 10-way Function
Dip Switch and 6-way Mode Dip Switch.
USITT DMX512(1990) multiplexed digital control, via 3 pin XLR connector
or terminals.
DMX Control Mode and Stand Alone Mode available .
1~7 patterns plus a sequence of 7 patterns, chase speed & fade time
adjustable..
Different Output Group modes for user assignable.
Output loading modes available in R.G.B mode, WHITE mode and COOL
WHITE& WARM WHITE mode.
Manual dimmer mode allows to control overall output intensity.
Full range voltage of AC 110-120V/AC220-240V power input option by
voltage selector.
Power Failure Memory.

2. SET UP

2.1 Power Supply:

Before plugging your unit in, be sure the source voltage in your area
matches the required voltage for your PLLEDCNTRHP
The PLLEDCNTRHP PLLEDCNTRHP is available in a 120v and 230v version. And its built-in
PLLEDCNTRHP PLLEDCNTRHP
PS is available in a DC24V/6.5A and DC 48V/3.2A . Due to variations in line
PLLEDCNTRHP power supply. PLLEDCNTRHP PLLEDCNTRHP
17