Table of Contents
Advertisement
Sensor failure
monitoring
Cable specification
max.
Ball pressure test
temperature
Pollution degree
Controller type
Software class
Storage temperature
IP class
Protection class
Dimensions
Weight
Electrical safety and Electro-Magnetic Compatibility for
this product is covered by the compliance with the EN/IEC
Standard "Automatic electrical controls for household and
similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
6
The thermostat has a built-in
monitoring circuit, which will
switch off the heating if the sen-
sor is disconnected or short-
circuited
1x4 mm
or 2x2,5 mm
2
75°C
2 (domestic use)
1C
A
-20°C to +65°C
21
Class II -
85 x 85 x 20-24 mm (in-wall
depth: 22 mm)
103 g
DEVIreg™ Touch
2
Installation Guide
Advertisement
Table of Contents
