Table of Contents
Advertisement
DEVIreg™ Touch
If you break the small plastic
seal on the back of the display
module, e.g. using a screwdriver,
it will be possible to set the
maximum floor temperature
up to 45°. Furthermore, it
will be possible to use only
a room sensor. However, this
option is not recommendable
due to an increased risk of
overheating the floor.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Note: Please contact the floor supplier before changing the
maximum floor temperature and be aware of the following:
• The floor temperature is measured where the sensor
is placed.
• The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
• Floor manufactures often specify the max. tempera-
ture on the top surface of the floor.
Installation Guide
21
Advertisement
Table of Contents
