Provisioning Status - Texas Instruments SimpleLink Wi-Fi CC3120 Programmer's Manual

Internet of things network processor
Hide thumbs Also See for SimpleLink Wi-Fi CC3120:
Table of Contents

Advertisement

www.ti.com
15.10 Common Events and Errors
15.10.1 Provisioning Status Event
The networking subsystem constantly updates the host application regarding the progress of the
provisioning process, through the provisioning status event.
The provisioning status event has the following parameters:
Status
Role
WlanStatus
SsidLen
Ssid
Table 15-2
lists the status parameter values.
SL_WLAN_PROVISIONING_GENERAL_ERROR
SL_WLAN_PROVISIONING_CONFIRMATION_S
TATUS_FAIL_NETWORK_NOT_FOUND
SL_WLAN_PROVISIONING_CONFIRMATION_S
TATUS_FAIL_CONNECTION_FAILED
SL_WLAN_PROVISIONING_CONFIRMATION_S
TATUS_FAIL_CONNECTION_SUCCESS_IP_NO
T_ACQUIRED
SL_WLAN_PROVISIONING_CONFIRMATION_S
TATUS_SUCCESS_FEEDBACK_FAILED
SL_WLAN_PROVISIONING_CONFIRMATION_S
TATUS_SUCCESS
SL_WLAN_PROVISIONING_ERROR_ABORT
SL_WLAN_PROVISIONING_ERROR_ABORT_IN
VALID_PARAM
SL_WLAN_PROVISIONING_ERROR_ABORT_H
TTP_SERVER_DISABLED
SL_WLAN_PROVISIONING_ERROR_ABORT_P
ROFILE_LIST_FULL
SL_WLAN_PROVISIONING_ERROR_ABORT_P
ROVISIONING_ALREADY_STARTED
SL_WLAN_PROVISIONING_AUTO_STARTED
SL_WLAN_PROVISIONING_STOPPED
SL_WLAN_PROVISIONING_SMART_CONFIG_S
YNCED
SL_WLAN_PROVISIONING_SMART_CONFIG_S
YNC_TIMEOUT
SL_WLAN_PROVISIONING_CONFIRMATION_W
LAN_CONNECT
SL_WLAN_PROVISIONING_CONFIRMATION_IP
_ACQUIRED
SL_WLAN_PROVISIONING_EXTERNAL_CONFI
GURATION_READY
SWRU455A – February 2017 – Revised March 2017
Submit Documentation Feedback
Table 15-2. Provisioning Status
0
The provisioning process has encountered an unknown error. TI
recommends stopping and starting the process again.
1
Profile confirmation failed because the SSID was not found during
scan.
2
Profile confirmation failed; the SSID was found during scan, but the
WLAN connection was not successful (possibly due to the wrong
password).
3
Profile confirmation failed; the SSID was found during scan, the
WLAN connection was successful, but an IP address was not
successfully acquired.
4
Profile confirmation failed; the SSID was found during scan, the
WLAN connection was successful, IP address was successfully
acquired, but the feedback to user about the successful connection
was not successfully delivered. This event might be followed by a
profile confirmation succeeded event, if feedback is eventually
delivered.
5
Profile confirmation succeeded; the SSID was found during scan, the
WLAN connection was successful, IP address was successfully
acquired, and the feedback to user about the successful connection
was successfully delivered.
6
The provisioning process was not started due to an unknown error.
7
Auto-provisioning process was not started due to an invalid
parameter.
8
Auto-provisioning process was not started because the HTTP server
is disabled.
9
Auto-provisioning process was not started because the profile list is
full.
10
Auto-provisioning process was not started because it is already
running.
11
The provisioning process was automatically started by the networking
subsystem.
12
The provisioning process has ended.
13
SmartConfig configuration data transmission was discovered by the
device. The device starts listening and collecting the profile data.
14
SmartConfig configuration data transmission was discovered by the
device, but the device was not able to extract the profile data from it.
15
A WLAN connection was established during profile confirmation
attempt.
16
IP address was acquired during profile confirmation attempt.
17
The host application may start running an external provisioning
method (relevant only when APSC + External Configuration mode is
used).
Copyright © 2017, Texas Instruments Incorporated
Common Events and Errors
213
Provisioning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simplelink wi-fi cc3220Simplelink cc3120Simplelink cc3220

Table of Contents