9. DISASSEMBLY AND REASSEMBLY OF MAJOR COMPONENTS
•
For the various tool storage before disassembly and parts storage after disassembly, the
shelf for parts is prepared
•
At the time of disassembly and reassembly, do the work with the naked and clean hand, and
also the working place must be maintained clean
•
The torn parts after disassembly must be kept not to collide each other.
•
In disassembling, torn parts should be laid in disassembled order.
9.1. Engine Disassembly
Engine parts' disassembly procedures are as follows;
9.1.1. Oil Level Gauge
Take out the oil level gauge.
9.1.2. Engine Oil
Remove an oil drain cock from the oil pan, and let engine oil discharge into the prepared
vessel
9.1.3. Cooling Water
Remove the cooling water drain plug from the cylinder block and oil cooler, various pipes,
etc. and let the cooling water discharge into the prepared vessel.
9.1.4. Cooling Fan
Remove fan fixing bolts, then take off
the cooling fan.
- 67 -
EPM2001I