Gobo Installation - Elation PROTEUS HYBRID User Manual

G O B O I N S T A L L A T I O N
WARNING! GOBO REPLACEMENT SHOULD ONLY BE DONE BE A TRAINED TECHNICIAN.
1. Turn OFF power and allow approximately 60 minutes for the fixture to cool down.
2. Place the head in an upright vertical position and engage both the PAN and TILT locks for
added stability while replacing the gobo.
3. Remove (12x) 3mm hex-head screws (6x per panel) to remove both center panels.
TILT
Lock
PAN
Lock
19