Honda CRF125F 2022 Owner's Manual page 93

Installation:
• Reverse the removal procedure.
1. Install the side collars into the left and right
side wheel hub. Carefully fit the brake disc
between the pads to avoid scratching them.
2. Insert the front axle shaft from the right
side, through the right fork leg and wheel
hub.
3. Tighten the front axle nut to the specified
torque.
Front axle nut torque:
62 N·m (6.3 kgf·m, 46 lbf·ft)
4. After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not rotate
freely.
Check front brake adjustment (page 25).
If the torque wrench was not used for
installation, see your dealer as soon as possible
to verify proper assembly. Improper assembly
may lead to loss of braking capacity.
83