Spark Arrester - Honda CRF125F 2022 Owner's Manual

SPARK ARRESTER

Refer to the Safety Precautions on page 55.
The exhaust system spark arrester must be
purged of accumulated carbon periodically (see
Maintenance Schedule for servicing period,
page 58).
The exhaust system becomes very hot during
operation and remains hot for a period of time
after stopping the engine. Allow the exhaust
system to cool before performing this
operation.
(1)
(2)
(1) Bolts
(2) Spark arrester
(3) (4)
(3) Gasket
(4) Muffler
1. Remove the bolts (1), the spark arrester (2),
and the gasket (3) from the muffler (4).
2. Use a brush to remove carbon deposits
from the spark arrester screen (5). Be
careful to avoid damaging the spark arrester
screen. The spark arrester must be free of
breaks and holes. Replace, if necessary.
Check the gasket. Replace, if necessary.
3. Install the spark arrester and a new gasket
in the muffler and tighten the bolts to the
specified torque.
Spark arrester bolt torque:
10 N·m (1.0 kgf·m, 7 lbf·ft)
(5) Spark arrester screen
(5)
75