Print Head Alignment; Aligning The Print Head Automatically Using The Product Control Panel - Epson SureColor T7770D Series User Manual

Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Checking the Nozzles Using a Computer Utility
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility

Print Head Alignment

If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Before you align the print head, note the following:
• Alignment varies depending on the loaded media. Align the print head using the media on which you
want to print and select the correct paper type as the Paper Type setting.
• Run a nozzle check before you align the print head. If there are any gaps in the nozzle check pattern,
clean the print head.
• Manually align the print head on any transparent or colored paper or on these paper types: Plain
paper, Epson Enhanced Matte Posterboard.

Aligning the Print Head Automatically Using the Product Control Panel

Aligning the Print Head Manually Using the Product Control Panel
Parent topic:
Aligning the Print Head Automatically Using the Product Control Panel
You can automatically align the print head using the control panel on your product. Make sure no direct
sunlight enters the printer, or the alignment pattern may not be read correctly.
Note: You must manually align the print head when you are using any transparent or colored paper or on
these paper types: Plain paper, Epson Enhanced Matte Posterboard.
1. Load roll paper or cut sheet paper in the printer.
Note: Load paper that is at least 15.2 × 21.9 inches (388 × 558 mm) or larger.
Print Head Cleaning
Adjusting Print Quality
288