Table of Contents
Advertisement
2000 W AC Power Supply Technical Specifications
2000 W AC Power Supply Technical Specifications
The 2000 W AC power supplies with front-to-back airflow (part nos. XN-ACPWR-2000W-FB and XN-
ACPWR-2000W-F) are available for use in all 5720 Series switches:
Table 46: Physical Specifications
Dimensions (with handle)
Dimensions (without handle)
Weight
Table 47: Power Specifications
Voltage input range
Nominal input ratings
Maximum inrush current
Output
Power supply input socket and cord
Power cord wall plug
Efficiency
Table 48: Environmental Specifications
Operating temperature
Storage temperature
Operating humidity
Operational shock
Power Cord Requirements for AC-Powered Switches and AC Power Supplies
An AC power cord is not included with the AC power supply.
98
ExtremeSwitching 5720 Series Hardware Installation Guide
Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 11.51 inches (29.25 cm)
Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 10.25 inches (26.05 cm)
2.95 lb (1.34 kg)
100-110V / 110-120V / 200-220V / 220-240V
• 100-110V , 12A, 50-60Hz,
• 110-120V , 12A, 50-60Hz,
• 200-220V , 10A, 50-60Hz,
• 220-240V ,10A, 50-60Hz,
45A at Max 264 VAC at 25C with cold start
• -54Vdc, 18.51A, max.1000W
• -54Vdc, 20.37A, max. 1100W
• -54Vdc, 33.33A, max. 1800W
• -54Vdc, 37.03A, max. 2000W
IEC/EN 60320-1/C16 AC input receptacles
Refer to
Power Cord Requirements for AC-Powered Switches
and AC Power Supplies
on page 98
Minimum efficiency: 88% at maximum power output
0°C to 50°C (normal operation)
-40°C to 70°C
93% relative humidity, non-condensing at 30C
Technical Specifications
Advertisement
Table of Contents
