Table of Contents
Advertisement
Install Your Switch
Figure 39: Two-Post Mid-Mount: Complete
7. Verify that the switch is level and is firmly attached to the rack.
If your switch comes with installed AC power supplies, skip to the topic
If your switch does not have an installed power supply, install one or two power supplies using the
instructions in
Install Optional Components
After the switch is secured to the rack, install optional components.
ExtremeSwitching switches support the use of pluggable transceivers and cables in the SFP+, SFP28,
QSFP+, and QSFP28 formats.
For a list of the optical components supported with ExtremeSwitching devices, see the
website.
Replace Internal AC Power Supplies
ExtremeSwitching 5720 Series Hardware Installation Guide
Install Optional Components
Turn on the Switch
on page 75.
on page 67.
Extreme Optics
65
Advertisement
Table of Contents
