Summit Wm200/2000 Controller Front Panel - Extreme Networks Summit WM User Manual

Summit WM Controller's physical description
Summit WM100 Controller data port cabling specification
The Summit WM100 Controller data ports have copper connectors.
NOTE
If your infrastructure does not allow the copper connection, you must get a Gigabit Media Converter to convert the
copper connection to a fibre optic connection. For example, you can use Netgear GC102 converter that receives the
copper connection and outputs traffic via the fibre optic connector.
This appendix describes the physical description and LEDs, SSD codes and their description of the
following models of the Summit WM Controller:
Summit WM Controller WM200/2000
Summit WM Controller WM20

Summit WM200/2000 Controller front panel

The Summit WM200/2000 Controller is composed of the following three cards:
Media/Persistent Storage Card
Network Processor Card
Host Summit WM Controller Card
The following figure identifies the main components on the front panel of Summit WM200/2000
Controller.
Figure 27: Summit WM200/2000 Controller front panel
LED
lights
Reset
switch
LCT switch
330
Data
ports
Host Controller
Management
card
port
Compact
Network Processor
Flash slot
card
Console
port
Summit WM User Guide, Software Version 5.3
Media/Persistent
storage card