Table of Contents
Advertisement
of the stove). lf this is not
possible, there should be a
mechanism (fuse, switch,
switch, etc.) on the electrical
installation to which the
product is connected, in
compliance with the electrical
regulations and separating all
poles trom the network.
• The product must not be
plugged into the outlet during
installation, repair, and
transportation.
• Do not plug the product into
an outlet that is loose, has
come out of its socket, is
braken, dirty, oily, with risk of
water contact (for example,
water that may leak trom the
counter).
• Never touch the plug with
wet hands! To unplug, do not
hold the cord, always hold
the plug.
• Make sure that the product
plug is securely plugged into
the outlet to avoid arcing.
• Plug the product into an
outlet that meets the voltage
and frequency values
specified on the type label.
• Do not jam the power cord
under and behind the
product. Do not put a heavy
object on the power cord.
6/EN
The power cord should not
be bent, crushed, and come
into contact with any heat
source.
• While the oven is operating,
its back surface also gets hot.
Power cords must not touch
the back surface,
connections may be
damaged.
• Do not jam the electric cables
into the oven door and pass
them over hot surfaces. You
may cause the oven to short
circuit and catch fire as a
result of the cable melting.
• Use original cable only. Do
not use cut or damaged
cables or extension leads.
• lf the power cord is damaged,
it must be replaced by a
manufacturer, an authorized
service or a person to be
specified by the importer
company in order to prevent
possible dangers.
• WARNING: Before replacing
the oven lamp, be sure to
disconnect the product trom
the mains supply to avoid the
risk of electric shock. Unplug
the product or turn off the
fuse trom the fuse box.
Advertisement
Table of Contents
