Remove laundry / appliance
switch off
1.
Open the program selector
place.
2.
Open the washing machine door and
remove the laundry.
3.
Turn off the tap.
Note:
This is not necessary with
AquaStop models.
Hints
Do not leave any items of laundry in
■
the drum. They may shrink the next
time they are washed or discolour
other items of laundry.
Remove foreign bodies from the drum
■
and the rubber sleeve due to the risk
of rust.
Wipe the rubber sleeve dry.
■
Leave the washing machine door and
■
detergent drawer open so that any
residual water can evaporate. Always
wait for the program to end as the
■
appliance may still be locked. Then
switch on the device and wait for it to
unlock.
Q
The following settings can be changed
a-
F.
Device settings
to be:
the end
■
■
■
To change these settings, the setting
mode must be activated.
1/2/3/4 ...
Activate setting mode:
1.
Set the program selector to position 1.
2.
The key sling Hold down and at the
The setting mode is activated and the
default setting appears on the display
panel.
Device settings
Device settings
The end signal volume
The key signal volume
Switch the drum care information
signal on / off
Program selector position
nen
The device is switched on.
same time turn the program selector to
position 2 to the right. The key sling let
go.
de
43