Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WNA254U0IN/04
Summary of Contents for Bosch WNA254U0IN/04
- Page 1 Washer dryer WNA254U0IN [en] User manual and installation instructions...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 40 Intended use Appliance housing/control panel . . . 40 Drum ......40 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance. - Page 11 Safety instructions Repairs and any other work Caution! ■ on the appliance must only Material damage/damage to be conducted by our the appliance customer service or by an Cleaning agents and agents for electrician. The same applies pretreating laundry (e.g. stain for replacing the mains cable removers, prewash sprays, etc.) (when necessary).
-
Page 12: Environmental Protection
The selectable temperatures apply ■ ■ www.bosch-home.com/in/about- to the care labels on the textiles. The bosch/responsibility.html to find out temperatures in the appliance may more details regarding ewaste deviate from this so that you get the disposal optimum mix of energy-saving and Consult the authorized service washing results. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting Safety instructions Installation on a base or a wooden joist floor Warning Risk of injury! Caution! The appliance is very heavy. Damage to the appliance ■ Be careful when lifting/transporting The appliance may "wander" and tip/ the appliance. topple from the base when spinning. -
Page 15: Removing The Transport Locks
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Caution! Damage to the appliance The appliance is secured for ■ transportation using transport locks. If the transport locks are not removed, the appliance may become damaged when it is operated. -
Page 16: Removing The Support Struts
Positioning and connecting Lock the covers firmly in place by Remove the transport strut. applying pressure to the snap-in hooks. Hose and cable lengths Removing the support struts Connection on left side Unscrew and remove all screws in the vertical transport struts. ( ~ 140 cm 0 ~ 150 cm Remove the transport struts. -
Page 17: Water Inlet
Positioning and connecting If the supply hose is too short for Note: Connection your connection, you can order an Connect the water supply hose to extension from the after-sales service. the water tap (¾" = 26.4 mm) and to the appliance: Water inlet –... -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure. -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Danger of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Grounding Instructions time Warning Danger of death! The appliance was inspected Improper connection of the ground may thoroughly before leaving the factory. To result in electric shock. Have the remove any residual test water, run the appliance checked by a qualified ¡... -
Page 21: Transportation
Positioning and connecting Transportation Insert all four sleeves. e.g. when moving home Preparatory work: Turn off the water tap. Reduce the water pressure in the supply hose. ~ Page 43 Drain any residual water. ~ Page 42 Disconnect the appliance from the mains. - Page 22 Positioning and connecting Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 15 Pour approx.
-
Page 23: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 24: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 33 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 34 A Start/Pause button for starting, interrupting, (e.g. -
Page 25: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting ‰/ Y/‰ ˜ Y É Wash + Dry Display Setting Description x Anti Stain °/¶/y/¸ — - 90° Temp.°C Temperature that +1/+2/+3 Ï Extra Rinse can be set in °C 2 Hygiene Care —... -
Page 26: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 27: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 28: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial to ensure correct detergent selection, temperature Saving Soiling/note... -
Page 29: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 30 Overview of programmes Programme/Type of laundry Options/Information 2,0 kg/- Delicates/Silk “ For delicate, washable fabrics, e.g. made of silk, satin, synthetic — - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm Ï Extra Rinse, x Anti Stain possible W Wool l 2,0 kg/1,0 kg...
- Page 31 Overview of programmes Programme/Type of laundry Options/Information ¡ Drum Clean 0,0 kg/0,0 kg Special programme for drum hygiene or fluff removal. Do not —, 40°C, 90 °C load any laundry. Fixed drying process is followed to dry drum 1000 rpm and gasket.
-
Page 32: Drying Table
Overview of programmes Programme/Type of laundry Options/Information & Outdoor 1,0 kg/1,0 kg Weatherproof and outdoor clothing with membrane coating and — - 40 °C water-resistant textiles. 400 - 800 rpm Remove all remaining softener in the dispenser before Note: Ï Extra Rinse, x Anti Stain, washing begins. -
Page 33: Programme Default Settings
Programme default settings ñ Ready in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 34: Additional Programme
Additional programme settings The individual washing mode: when ■ Additional programme select a programme (e.g.\ Wash & Dry 60 min) that defaulted washing settings and drying phases combined, touch É Wash + Dry till only the symbol You can find possible additional N ote: Y appeared in display. -
Page 35: Ï Extra Rinse
Operating the appliance Ï Extra Rinse Operating the Settings that can be selected: appliance + 1 rinse cycle P reparing the appliance + 2 rinse cycles O p e r a t i n g t h e a p p l i a n c e + 3 rinse cycles The appliance was tested before delivery. -
Page 36: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle. -
Page 37: Starting The Programme
Operating the appliance Starting the programme Filling the dispensers Pull out the detergent drawer. Touch and hold A Start/Pause button for 1~2 seconds, then release the Warning button. The programme starts and the Eye / skin irritation! appliance door is locked. If the detergent drawer is opened while the appliance is running, The finish-in time is shown in the display... -
Page 38: Adding/Removing Laundry
Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the A Start/Pause button. To cool down laundry: Select Rinse Touch the A Start/Pause button. -
Page 39: Removing Laundry/Switching Off The Appliance
Appliance settings Removing laundry/switching Appliance settings off the appliance Y ou can change the following settings: Set programme selector to Off. A p p l i a n c e s e t t i n g s The volume of the end signal. Open the door and remove the ■... -
Page 40: Sensors
Sensors 4: Switching the drum care Caution! ■ information signal on/off. The appliance may be damaged! Cleaning agents that contain solvents, Ž e.g. cleaning solvent, can damage Œ off surfaces and components in the appliance. Exiting setting mode Do not use cleaning agents that contain You can now end the process and set solvents. -
Page 41: Descaling
Cleaning and maintenance Descaling Clean the detergent dispenser tray and insert with water and a brush, Descaling should not be necessary if and dry it. Clean the inside of the the detergent is measured out correctly. housing as well. However, if it is required, follow the manufacturer's instructions for the descaling agent. -
Page 42: Drain Pump Is Blocked
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump. -
Page 43: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Turn the programme selector to Off. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. -
Page 44: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage! about them Any escaping water may cause water damage. E mergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m seen through the glass. -
Page 45: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with A Start/Pause button or select Spin 0 . -
Page 46: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy H:32 The unbalanced load detection system has interrupted the spin cycle because the alternating with laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. when programme is finished Other displays Turn the programme selector to Off, wait for five seconds and then switch it on... - Page 47 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 48 Faults and what to do about them Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■ longer than usual. ance by repeatedly distributing the laundry. Not a fault – the foam detection system is activated – a rinse cycle has ■...
-
Page 49: After-Sales Service
After-sales service Faults Cause/Remedy The drying result is not After the end of the programme, warm laundry feels damper than it actu- ■ satisfactory (laundry is ally is. Spread the laundry out and allow the heat to disperse. not dry enough). Excessively high ambient temperature (above 30 °C) or inadequate ventila- ■... -
Page 50: Consumption Values
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programmes (approximate values) Programme Load Energy consump- Water consump- Programme... -
Page 51: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 848 mm x 598 mm x 590 mm In addition to warranty claims against (height x width x depth) - Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.