1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
memory
module.
5. Remove the
PCIe
SSD.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
heat sink
9. Remove the
system
board.
10. Disconnect the cables from the palmrest end:
a. keyboard cable [1]
b. keyboard backlight cable [2] , USH Board cable(Optional)
c. Touchpad and USH board cables [3,4]
11. To remove the keyboard assembly:
To identify the screws, see
NOTE:
a. Remove the 18 (M2.0 x 2.5) screws that secure the keyboard [1].
b. Lift the keyboard assembly from the chassis [2].
Before working inside your
assembly.
screw list
computer.
Removing and installing components
45