Chapter 2 Hardware Installation; Hardware Installation Steps; Checking Motherboard's Jumper Setting - JETWAY 626EMP Series User Manual

Hardware installation

2-1 Hardware installation Steps

Before using your computer, you had better complete the following steps:
1. Check motherboard jumper setting
2. Install CPU and Fan
3. Install System Memory (DIMM)
4. Install Expansion cards
5. Connect IDE and Floppy cables, Front Panel /Back Panel cable
6. Connect ATX Power cable
7. Power-On and Load Standard Default
8. Reboot
9. Install Operating System
10. Install Driver and Utility

2-2 Checking Motherboard's Jumper Setting

(1) Keyboard Power On function Enabled/Disabled (3-pin): JP1
When setting Enabled you can using keyboard by key in password to power on system.
(2) USB Power On function Enabled/Disabled (3-pin): JP8
When setting Enabled you can using USB Device to power on system.
Chapter 2
JP1
1
3
1-2 closed K/B Power ON Disable
(Default)
Keyboard Power On Setting
JP8
1 3
JP8
1 3
5
JP1
1
3
2-3 closed K/B Power ON Enabled
1-2 closed USB Power On Disabled (Default)
2-3 closed USB Power On Enabled