(8)
Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This connector
power up the system when a wake up signal is received through the LAN card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(9)
FAN Headers (3-pin) : SYSFAN, SYSFAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
FP
Pin 1
Pin 1
System Case Connections
WOL
1
3
Wake-On-LAN Headers
1
3
CPUFAN
1
3
SYSFAN
1
3
SYSFAN2
FAN Headers
17
SPEAK
VCC 5
G ND
NC
SPKR