Table of Contents
Advertisement
Boot Device Configuration
Press <Enter> to enter the sub-menu screen.
Boot Device Configuration
Single Image
Master SCSI Controller .................... AIC-7901 at slot 07 03:07:00
Select SCSI peripheral from which to boot
Boot SCSI Controller ......................... AIC-7901 at slot 07 03:07:00
Boot SCSI ID ........................................ 0
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled
Boot LUN Number ............................. 0
Boot SCSI Controllers
Select SCSI channel AIC-7901 to boot up the SCSI subsystem.
Boot SCSI ID
Specify a SCSI device to become the boot device by selecting its SCSI ID.
Setting options: [0] ~ [15].
Boot LUN Number
If a boot device has multiple logical units, you must specify the boot logical unit
number (LUN). If multiple LUN support is disabled, specifying a number here is
useless. Setting options: [0] ~ [7].
SCSI Device Configuration
Press <Enter> and the following sub-menu screen appears. The sub-menu screen
allows you to specify the configuration for each device on the SCSI bus.
Additional Options
SCSI BIOS Setup
A-5
Advertisement
Table of Contents
