Advanced - MSI MS-9221 User Manual

Items in the menu are divided into several sub-menus. Each sub-menu provides more
settings. To enter the sub-menu, highligh the sub-menu you want to configure and
press <Enter>.
Main

Advanced

Large Disk Access Mode:
Paralle ATA:
Serial ATA:
Native Mode Operation:
SATA RAID Enable:
8Advanced Chipset Control
8Advanced Processor Options
8Console Redirection
F1 Help
F1 Help
Esc Exit
Esc Exit
and Exit
Large Disk Access M ode
Select [DOS] if you have DOS. Select [Other] if you have another operating system
such as UNIX. A large disk is one that has more than 1024 cylinders, more than 16
heads, or more than 63 tracks per sector. Options: [DOS], [Other].
Parallel ATA
The chipset contains a PCI IDE interface that supports two IDE channels: Primary (IRQ
14) and Secondary (IRQ 15). Each channel supports two IDE devices, so the system
is capable of supporting a total of four IDE devices. Select [Primary], [Secondary], or
[Both] to activate chipset IDE interface(s) installed on your system board.
Serial ATA
This setting allows you to enable or disable the onchip Serial-ATA controller. Settings:
[Enabled], [Disabled].
Native M ode Operation
Certain OS does not support Native Mode. In this mode, system BIOS will search all
Advanced
PhoenixBIOS Setup Utility
Security Power
[DOS]
[Both]
[Enabled]
[Auto]
[Disabled]
Select Item -/+ Change Values
Select Item -/+ Change Values
Select Menu Enter Select Sub-Menu F10 Save and Exit
Select Menu
Boot PC Health
Item Specific Help
Select the operating sys-
tem installed on your sys-
tem which you will use
most commonly.
Note: An incorrect setting
can cause some operating
systems to display unex-
pected behavior.
F9 Setup Defaults
F9 Setup Defaults
8
Select Sub-Menu
BIOS Setup
Exit
F10 Save
4-9