Table of Contents
Advertisement
MS-9245 1U Rackmount Server
Change COM port Setting
Select this line to change COM port setting. Options: [Yes], [No].
COM port on BMC
Select this line to enable/disable COM port on BMC. Options: [Disabled],
[IPMI], [CLI].
Clear System Event Log
Enabling this selection will force the BIOS to clear the System Event Log
on the next boot. Options: [Disabled], [Enabled].
Existing Event Log number/Remaining Event Log number
It shows the number of existing/remaining event log.
SYS Firmware Progress
Enabling this selection will log POST Progress. Options: [Enabled],
[Disabled].
BIOS POST Watchdog
Enabling this selection will enable POST watchdog. Options: [Enabled],
[Disabled].
System Event Log
Press <Enter> to display the System Event Log.
Advanced
System Event Log
SEL Entry Number =
SEL Record ID =
SEL Record Type =
Timestamp =
Generator Id =
SEL Message Rev =
Sensor Type =
Sensor Number =
SEL Event Type =
SEL Event Data =
F1
Help
Esc Exit
3-18
PhoenixBIOS Setup Utility
1
0010
02 - System Event Record
07.29.2003 10:50:08
20 00
04
01 - Temperature
--
32 - TMP_S2
81 - Upper Non-critical Going
57 24 2A
Select Item
-/+ Change Values
Select Menu
Select
Sub-Menu
8
Item Specific Help
This is an entry in the
System Event Log
F9 Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
