Ipmi - MSI MS-9245 User Manual

Clear all DMI event logs
Setting this to Yes will clear the DMI event log after rebooting. Options:
[Yes], [No].
Event Logging
Select [Enabled] to allow logging of DMI events. Options: [Enabled],
[Disabled].

IPMI

Press PgUp/<+> or PgDn/<-> to IPMI. The following submenu will appear.
Advanced
IPMI Specification Version
BMC Firmware Version
Setting PEF Configuration
Change COM port Setting
COM port on BMC
Clear System Event Log
Existing Event Log number
Remaining Event Log number
SYS Firmware Progress
BIOS POST Watchdog
System Event Log
8
F1 Help
Esc Exit
IPMI Specification Version
It shows the support version of IPMI specification. (read only)
BMC Firmware Version
It shows the current BMC firmware version. (read only)
Setting PEF Configuration
Select this line to enable/disable the Platform Event Filter (PEF). Options:
[Disabled], [Enabled].
PhoenixBIOS Setup Utility
I P M I
1 . 5
3.24
[Enabled]
[No]
[Disabled]
[Disabled]
12
115
[Enabled]
[Enabled]
Select Item -/+ Change Values
Select Menu Select Sub-Menu
8
BIOS Setup
Item Specific Help
Select this line to
en/disable COM port on
B M C .
F9 Setup Defaults
F10 Save and Exit
3-17