Call Button; Display Illumination; Lock Function - Cobra microTALK MT 725 Owner's Manual

OPERATION
Volume
To Adjust the Volume:
1. Press the VOLUME UP or the
VOLUME DOWN buttons.
A triple beep sound is used to indicate
that you have reached the minimum
(1) or maximum (8) volume level.

Call Button

To Alert Another Person That You Are Calling:
1. Press and release the CALL button.
The other person will hear a two (2) second ringing tone.
You cannot receive transmissions while sending a call.
NOTE: Both radios must be tuned to the same channel
and privacy code to communicate.
Channels
To Select a Channel:
1. With the radio on, select any of the 8 channels by
pushing the CHANNEL UP or CHANNEL DOWN button.
You can press and hold the CHANNEL UP or CHANNEL
DOWN button for fast advance.
NOTE: Both radios must be tuned to the same channel
and privacy code (see "CTCSS Privacy Codes") to
communicate.

Lock Function

The LOCK button locks the CHANNEL UP, CHANNEL DOWN, MODE and POWER
buttons to prevent accidental operation.
To Use the Lock Function:
1. Press and hold the LOCK button for
two (2) seconds to turn the Lock
On or Off.
A double beep sound is used to
confirm your Lock On or Off request.
When the radio is in Lock Mode, the Lock icon will be displayed.

Display Illumination

To Illuminate Your Display:
1. Press and release the LIGHT/MAX RANGE button to
illuminate the display for ten (10) seconds.
Volume Buttons
Lock Button
English
Volume Level
Call Button
Channel Buttons
Channels
Lock Icon
Light/Max Range
Button