Channel Scan - Cobra microTALK MT 725 Owner's Manual

MODE FUNCTIONS
To Set the VOX Sensitivity Level:
1. Press the MODE button until the VOX icon flashes and
the current sensitivity level is displayed.
The current sensitivity level is displayed with the letter
"L" and a number 1 to 5, 5 being the most sensitive
level and 1 being the least sensitive level.
2. Press the CHANNEL UP or CHANNEL DOWN button to
change the setting.
3. When your desired VOX sensitivity level is displayed,
choose one of the following:
a. Press the MODE button to enter the new setting
and proceed to other functions.
b. Press the LOCK button to enter the new setting and
return to LISTENING MODE.
c. Do not press any buttons for fifteen (15) seconds
to enter the new setting and return to LISTENING
MODE.

Channel Scan

Your microTALK
®
NOTE: The radio ignores specific CTCSS privacy codes while scanning
channels.
To Scan Channels:
1. Press the MODE button until the Scan icon and the
channel number flash on the display.
2. Press the CHANNEL UP or CHANNEL DOWN button to
begin scanning channels.
The Scan icon will continue to be displayed when channel
scan is On. Your radio will continue to scan all channels
and stop if an incoming transmission is detected. Your
radio will remain on that channel for ten (10) seconds.
While setting channel scan, if you do not press any
buttons for fifteen (15) seconds your radio will
automatically return to LISTENING MODE on the channel
or channel/privacy code displayed before you entered
Mode Functions.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that channel. Your
radio will remain on that channel and return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning
channels.
radio can automatically scan channels (1 to 8).
English
Mode Button
Select VOX
Sensitivity Level
Channel Buttons
Mode Button
Select Scan Channels
Channel Buttons