Cobra microTALK MT 725 Owner's Manual page 15

MODE FUNCTIONS
To Turn Dual Watch On:
NOTE: Dual Watch Location 2 must be programmed to
turn Dual Watch on.
1. Set the first Dual Watch Location (channel/privacy
code) you wish to monitor (see "Channels" and
"CTCSS Privacy Codes" sections for further details).
2. Press the MODE button until the Dual Watch icon and
the channel number flash on the display.
NOTE: While setting Dual Watch, if you do not press any
buttons for fifteen (15) seconds your radio will
automatically return to LISTENING MODE on the
last channel or channel/privacy code displayed
before you entered Mode Functions.
3. Press the LOCK button to engage DUAL WATCH MODE.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that Dual Watch
Location. Your radio will remain on that Dual Watch Location and return
to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume Dual
Watch.
If you press the TALK button while in Dual Watch and not within ten (10)
seconds of receiving a transmission, you will transmit on the last Dual Watch
Location on which you received a transmission. This will return the radio to
LISTENING MODE.
If you do not press any button within ten (10) seconds, your radio will
automatically resume Dual Watch.
During Dual Watch (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either Dual Watch
Location 1 or the last Dual Watch Location on which, during Dual
Watch, you last received a transmission. This will return the radio to
LISTENING MODE.
b. Press the MODE button to proceed to other functions.
c. Press the LOCK button to return to LISTENING MODE on either Dual
Watch Location 1 or the last Dual Watch Location on which, during Dual
Watch, you last received a transmission.
English
Select Channel
Mode Button
Lock Button