Front Panel Connectors: Jfp1 & Jfp2; Front Usb Connectors: Jusb1/Jusb2; Cd-In Connector: Cd_In1; Spdif-Out Connector: Jsp1 - MSI MS-7071 Instruction Manual

compliant with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk drive.
Front Panel Connectors: JFP1 & JFP2
The mainboard provides two front panel connectors for electrical
connection to the front panel switches and LEDs. The JFP1 is
compliant with Intel Front Panel I/O Connectivity Design Guide.

CD-In Connector: CD_IN1

The connector is for CD-ROM audio connector.

SPDIF-Out Connector: JSP1

This connector is used to connect SPDIF interface for digital audio
transmission.

Front USB Connectors: JUSB1/JUSB2

The mainboard provides two USB 2.0 pin headers that are compliant with
®
Intel I/O Connectivity Design Guide. USB 2.0 technology increases data
transfer rate up to a maximum throughput of 480Mbps, which is 40 times
faster than USB 1.1, and is ideal for connecting high-speed USB interface
peripherals such as USB HDD, digital cameras, MP3 players, printers,
modems and the like.
MSI Reminds You...
Note that the pins of VCC and GND must be connected correctly or it may cause some damage.
Serial Port Connector: COM2
The mainboard offers one serial port connector without housing. This
connector is a 16550A high speed communication port that sends and
receives 16 bytes FIFOs. You can attach a serial mouse or other serial
device directly to it.
9