MSI MS-7036 User Manual page 56

Run VGA BIOS if S3 Resume
When ACPI Standby State is set to [S3/STR], users can select the options in this field.
Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system
wakes up (resumes) from S3 sleep state. The system resume time is shortened when
you disable the function, but system will need an AGP driver to initialize the VGA card.
Therefore, if the AGP driver of the card does not support the initialization feature, the
display may work abnormally or not function after resuming from S3. Options: [Auto],
[Yes], [No].
Power Management
This item is used to select the degree (or type) of power saving and is related to the
mode: Suspend Mode. There are three options for power management:
[Min Saving]
[Max Saving]
[User Define]
Video Off Method
This determines the manner in which the monitor is blanked.
[V/H SYNC+Blank]
[Blank Screen] This option only writes blanks to the video buffer.
[DPMS Support] Initial display power management signalling.
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode. Settings:
[Yes], [No].
Suspend Type
This item allows you to select the suspend type for system power management.
Settings: [Stop Grant], [PwrOn Suspend].
MODEM Use IRQ
This setting names the interrupt request (IRQ) line assigned to the modem (if any) on
your system. Activity of the selected IRQ always awakens the system. Setting
options: [3], [4], [5], [7], [9], [10], [11], [NA].
Suspend Mode
When you choose [User Define] in the Power Management item, this item is selectable.
This setting allows you to select the type of Suspend mode. Setting options: [Disabled]
(default setting), [1 min] to [1 hour].
Minimum Power Management. Suspend Mode = 1 Hour.
Maximum Power Management. Suspend Mode = 1 Min.
Allows end users to configure the Suspend Mode field.
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
BIOS Setup
3-21