Table of Contents
Advertisement
Setting BIOS Function
SDRAM Burst Length
This setting allows you to set the size of Burst-Length for DRAM. Bursting
feature is a technique that DRAM itself predicts the address of the next
memory location to be accessed after the first address is accessed. To use
the feature, you need to define the burst length, which is the actual length
of burst plus the starting address and allows internal address counter to
properly generate the next memory location. The bigger the size, the
faster the DRAM performance.
Settings: 4 QW, 8 QW.
SDRAM Command Rate
This setting controls the SDRAM command rate. Selecting Enabled al-
lows SDRAM signal controller to run at 1T (T=clock cycles) rate. Select-
ing Disabled makes SDRAM signal controller run at 2T rate. 1T is faster
than 2T. Setting options: Disabled, Enabled.
Fast Command
This item controls the internal timing of CPU. Selecting Ultra allows
CPU to handle data/instructions at the fastest speed. Fast enables CPU to
handle at a faster speed, while Normal let CPU handle them at the slow-
est rate.
AGP Timing Control
Press <Enter> to enter the sub-menu and the following screen appears:
3-13
Advertisement
Table of Contents
