Table of Contents
Advertisement
Chapter 3
3.1 Entering Setup
Power on the computer and the system will start POST (Power On Self
Test) process. When the message below appears on the screen, press <DEL> key
to enter Setup.
If the message disappears before you respond and you still wish to enter
Setup, restart the system by turning it OFF and On or pressing the RESET button.
You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys.
Control Keys
< >
Move to the previous item
< >
Move to the next item
< >
Move to the item in the left hand
< >
Move to the item in the right hand
<Enter>
Select the item
<Esc>
Jumps to the Exit menu or returns to the main
menu from a
<-/PD>
Decrease the numeric value or make changes
<+/PU>
Increase the numeric value or make changes
<F7>
Load BIOS Setup Defaults
<F9>
Load High Performance Defaults
<F10>
Save all the CMOS changes and exit
3-2
Press DEL to enter SETUP
submenu
Advertisement
Table of Contents
