Ap Mode - Tenda AC23 User Manual

5.8

AP mode

When you have a smart home gateway which only provides wired internet access, you can set the
router to work in AP mode to provide wireless coverage.
When the router is set to AP mode:
Every physical port can be used as a LAN port.
⚫
The LAN IP address of the router will be changed. Please log in to web UI of the router by visiting
⚫
tendawifi.com.
Functions, such as bandwidth control and virtual server will be unavailable. Refer to the web UI for
⚫
available functions.
Configuring procedure:
If you have finished the quick setup wizard before, start a web browser and visit tendawifi.com, then
start from Step
Step 1 Power on the router. Connect a computer to a LAN port (1, 2 and IPTV/3 for AC23 and
AC21, and 1, 2, 3 and IPTV/4 for AC19) of the router (AC23 is used for illustration here), or
connect your smart phone to the WiFi network of the router.
or
Step 2 Log in to the web UI of the router.
1. Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router. A computer is used for illustration below.
2.
59