MSI 945 Neo5 Series User Manual page 53

On-Chip ATA Device
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip IDE Controller
The integrated peripheral controller contains a IDE interface with support for
two IDE channels. Select [Enabled] to activate the IDE interface.
PCI IDE BusM aster
Set this option to [Enabled] to specify that the IDE controller on the PCI local bus
has bus mastering capability.
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1
(COM 1). Selecting [Auto] allows AMIBIOS to automatically determine the cor-
rect base I/O port address.
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC/IRQ7]
[278/IRQ5]
[378/IRQ7]
Line Printer port 0
Line Printer port 2
Line Printer port 1
BIOS Setup
3-13