Connectors - MSI 945 Neo5 Series User Manual

Connectors

.
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, and
USB Ports.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPUFAN1/SYSFAN2/PWRFAN2
The CPUFAN1 (processor fan), SYSFAN2 and PW RFAN2 support system cooling fan
with +12V. It supports four/three-pin head connector. W hen connecting the wire to
the connectors, always take note that the red wire is the positive and should be
connected to the +12V, the black wire is Ground and should be connected to GND. If
the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN1 supports the fan control only with 4-pin CPU fan.
3. Please refer to the recommended CPU fans at Intel
FDD1
GND
+12V
Sensor
PW RFAN2
®
Hardware Setup
GND
+12V
Sensor
SYSFAN2
official website.
2-17