M S-7236 M ainboard
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is opened, the
switch will be short. The system will record this status and show a warning mes-
sage on the screen. To clear the warning, you must enter the BIOS utility and clear the
record.
SPDIF-Out Connector: JSPD1
(Optional, for HDMI graphics card only)
This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission to the HDMI graphics card.
2-22
1
CINTRU
2
GNF
JCI1
SPDF0
GND
JSPD1